|
use |
This busbar processing machine is mainly used for the processing of copper and aluminum busbars of various high and low voltage power transmission and distribution complete sets of electrical and power transformers. It is used for cutting, punching, bending, bending, and other processes of copper and aluminum busbars. |
|
main feature |
One machine and three stations are synchronized in one, and can be used independently at the same time. There is no waste after cutting at the cutting station. The high-precision five-arm punching die set has its own light source positioning and scale positioning. Double-cylinder blanking device, smooth punching waste discharge , Digital ruler is equipped with proximity switch device, large and small bending station pressure adjustment, manual and numerical control can be freely converted, the bending angle is simple and convenient. |
|
Station function |
Various molds such as shearing, punching, PLC program-controlled bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional. |
|
Electronic control function |
Start as you use it, stop automatically, save electricity and fuel, equipped with preheating function |
advantage
1. Shearing automatic downward pressure type, up and down rubber device, easy to cut in short rows,
2. Guide trough, no waste after shearing, small inclination of section
No need to adjust the blade gap for
3.3-12mm copper and aluminum bars
4. High-precision five-arm punching die set, easy to use, no need to change one
5. Double-cylinder blanking device, the lower die is not easy to damage
6. Punching light source alignment and scale positioning, punching operation is simple and flexible
7. Double oil cutting device, smooth waste discharge
8. The original bending station tie rod design is equipped with a universal steering punch, which can process special return shapes (U-shaped bends)
9. The bending station can interchange all kinds of molds easily and quickly
10.PLC program control mode is divided into: angle mode and trigonometric function mode operation is quick and does not require professional CNC personnel to operate (optional)
The main technical parameters
|
Nominal pressure |
650KN |
|
Cut specifications |
15×160mm |
|
Hole processing range |
Φ4.3～27mm |
|
Maximum processing size of flat bending |
15×160mm |
|
Voltage |
380V/50HZ/3×4KW |
|
Machine dimensions |
1720mm×1300mm×1410mm |
|
Machine weight |
about 1600kg |
